To keep a home always immaculate, some skills are extremely necessary. Among them, the exchange of taps stands out. To do this kind of work without any major problems, it’s critical that you know how to install a faucet.
Therefore, we have prepared this text especially for you. Just follow this simple step by step and install the faucet correctly in your home. Check out!
Items needed to install a faucet:
Before starting to install a faucet, you should check that you have some items, as we will list below. If you don’t have them, you need to buy them at a specialist store before you start.
Faucet:
The most important item to change the faucet is the object in question, which should preferably be new. There are several types of faucets on the market and it is important to know which types are best for homes.
Thread sealing tape:
The thread seal tape has as its main objective to seal the union between the faucet and the water point, so that there is no leakage, which results in damage and waste of water.
Griffin wrench or spanner:
The spanner or spanner is for you to tighten the faucet nut correctly, without greater risk of breakage or wrong installation, which allows leaks.
Step by step how to install the faucet:
Now we will present the step-by-step how to perform the installation. Follow them so that installation is very smooth and ensures a longer service life of the faucet.
Choose the faucet:
To choose the faucet, you must take into account several factors — ranging from your personal taste for the faucet’s aesthetics, to the quality and type of operation it presents. Consult manufacturers’ catalogs and choose the one that is most useful and suitable for your needs. If you need technical assistance, please contact one of our experts.
Close the water register:
A very important detail to be done when replacing and installing a faucet is closing the water valve, which prevents a leak during installation — which ends up wetting the environment and making the process difficult.
turn off the faucet:
After closing the water valve, the faucet that has the problem must be removed. For this, you can must use the spanner or spanner.
Put the pressure reducer:
The pressure reducer serves to reduce the water pressure, and the flow regulator serves to control the flow of water that passes through the faucet.
Both are important tools for places with high water pressure, and must be placed before placing the faucet.
Fit and pass the thread sealant:
After placing the pressure reducer, the thread seal tape must be passed along the entire perimeter of the tap thread, to prevent leakage at the location.
Turn on the tap and open the register:
Finally, the faucet must be installed — carefully and using the materials indicated above. After placement, you should open the registry and verify that everything went well with the installation.
Knowing how to install a faucet is essential for you to maintain very important areas of your home, such as bathrooms, kitchens, laundry areas, gardens, among others.